Some electrical work gets planned. A homeowner maps out a kitchen remodel, a property manager schedules a turnover inspection, a business owner decides it is finally time to add circuits before the next tenant moves in. Those calls come in days or weeks ahead, and we scope the job on the phone before anything gets booked.
Other calls come in the same morning. A breaker that will not reset, an outlet that sparked and went dead, half the circuits down with no clear reason. We are available at any hour, any day, including nights, weekends, and holidays, because those situations do not wait. When you call us, you get a straight answer about the work.
Call (945) 446-2995 and we will go through what is happening and get it on the schedule.
Arlington is a large city with a wide mix of housing stock and commercial property. Older homes on original wiring sit alongside newer construction, and commercial spaces range from small storefronts to multi-tenant buildings with serious electrical demands. The jobs below cover the full range of what we take on.
A standard switch swap is a short visit. A dimmer or smart switch installation involves confirming the existing wiring has a neutral conductor where the device needs one, and that the circuit is rated for the load. We check what is in the wall before any device goes in.
A whole-home surge protector installs at the panel and catches voltage spikes before they reach the circuits. Point-of-use strips protect individual devices. A panel-level device protects everything: appliances, EV charger circuits, entertainment systems, and HVAC wiring. Severe thunderstorms and lightning are common across this region, and a single nearby strike can send a spike through every circuit in the house. The installation is a single visit and does not require rewiring.
Not every fault is obvious. We cover this in more detail in the next section, but it belongs in this list too. Finding a fault that only shows up under certain conditions is its own scope of work, separate from the repair that follows.
Outdoor receptacles need covers and enclosures rated for exterior use. A standard indoor outlet mounted outside corrodes, traps moisture, and creates a shock risk. We install weatherproof covers, in-use covers that stay sealed even with a cord plugged in, and GFCI protection on outdoor circuits. Exterior lighting and security lighting installations fall here as well.
Knob-and-tube wiring has no ground conductor and was not designed for modern loads. It is common in older homes that have not had major electrical work done. Whether a full replacement or a partial rewire is the right call depends on the condition of what is there and what the property demands. We assess it, explain the options, and give no-pressure estimates, priced up front.
Rewiring comes up when the existing wiring is aluminum branch circuit, knob-and-tube, or has been patched and modified past the point of reliability. A partial rewire addresses specific circuits or areas. A whole-home rewire replaces the branch circuit wiring throughout. Either way, the scope is determined by a real assessment of what is in the walls, not a standard package. We explain what we found and what it involves before any work begins.
Ceiling fan installation, subpanel installation, EV charger circuits, and dedicated circuits for large appliances are also part of what we handle. Code-compliant wiring and GFCI and AFCI protection in required locations are part of every job, not an add-on.
Some electrical problems are easy to find. A dead outlet, a tripped breaker with an obvious cause, a light fixture that stopped working. Those are diagnosed quickly.
Others take longer. A breaker that trips once a week, always on the same circuit but never during a simple test. An outlet that only fails when it rains. A circuit that holds under normal use and drops when a specific appliance runs. These are the faults that require a methodical approach: checking connections under load, tracing the circuit back, looking at what changes when the fault appears.
Finding an intermittent fault is its own job. It is not the same as the repair that follows, and it should not be treated as a quick add-on to a visit. We scope it honestly, explain what the diagnostic involves, and let you know what we found before any repair is discussed. Reach out and we'll get it diagnosed.
Electrical pricing depends on what the job actually involves. A quote given before a visit is based on what you describe on the call. That price can change once the work is underway if what is behind the wall turns out to be different from what was expected.
The things that move a quote are straightforward:
For a panel upgrade or a rewiring project, a load calculation is part of scoping the job correctly. That tells us what the new service needs to handle, not just what fits in the existing space. We confirm the scope and the price before work begins. You get the rate on the phone, and the price is confirmed before we schedule.
Call (945) 446-2995 to go through the details.
The gap between tenants is the best time to do electrical work that would otherwise mean disrupting someone's daily life. Rewiring a kitchen, adding circuits to a bedroom, replacing old outlets throughout a unit, or bringing a panel up to current capacity all go faster and cleaner when the space is empty.
Access is simpler too. There is no furniture to work around, no schedule to coordinate, and no need to shut down a room that someone is using. We confirm access arrangements on the call and work through the scope before the visit so nothing is left unclear when we arrive. We'll get the job wired and finished.
Property managers and landlords handling multiple units often use the turnover window for inspection work as well. An empty unit gives a clear view of what the wiring contains and what it will need before the next lease starts.
When a job is complete, the work does not end at putting the cover plates back on. Circuits get tested. Breakers are labeled to reflect what they actually protect. Any new wiring is documented so the next person who opens the panel knows what they are looking at.
That documentation matters more than it might seem. When a property changes hands, a buyer's inspector will look at the panel and the wiring. Clear labeling and a record of what was replaced or upgraded makes that process straightforward. For a rental property, it gives the next property manager a real picture of what the electrical system contains.
We take pride in the electrical work we leave behind, and that includes leaving the panel and the documentation in order. A job that looks right from the outside but leaves the panel unlabeled and the circuits unverified is not a finished job.
Booking a planned project is a straightforward call. We go through the scope, confirm the price, and find a time that fits. For larger jobs, we talk through what access is needed and what parts of the property will be affected before the visit is confirmed.
When a problem will not keep, we take short-notice calls at any hour. Emergency calls are answered, and we work through what is happening on the phone before anyone is dispatched so the visit is scoped before it starts. You are not left waiting for a callback window.
For businesses that have to stay open and tenants who cannot easily leave, we talk through the schedule on the call. Electrical work sometimes requires a circuit to be de-energized, and knowing which circuits are involved lets you plan around it. We confirm what will be affected before we arrive.
We'll find the fault and fix it right. It is all set out on our full list of electrical services.
We serve Arlington and the surrounding communities across Tarrant County. That includes Pantego, Dalworthington Gardens, Grand Prairie, Kennedale, and Forest Hill. Whether the property is a single-family home, a rental unit, or a commercial space anywhere in this part of the county, the process is the same: a call to scope the job, a price confirmed before anything starts, and the work done correctly.
Call (945) 446-2995 and we will go through what you need and get it on the schedule.
If the fitting itself is the cause, replacing it is usually straightforward. We confirm the wiring behind it is in good condition before the new fitting goes in. If the wiring has been affected by the fitting failure, that is addressed at the same time.
If the new appliance has a higher draw than the circuit was sized for, the circuit needs to be upgraded before the appliance is connected. We assess the existing circuit and the appliance requirements and scope any additional work before the installation proceeds.
Permit records become part of the property's file with the relevant authority and stay on record there. We can discuss what documentation is available for a specific job when you call.
We handle the permit process as part of the job. Permit requirements depend on the type and scope of the work. We confirm what applies to the specific job on the call and factor the permit into the scope and timeline.
The repaired circuit or device is tested under load before we leave. If the repair involved the panel or affected other circuits, those are checked as well to confirm the fix did not shift the problem somewhere else.
Call now. Get it scoped. Get it wired to code.
We are available around the clock for electrical repairs, panel upgrades, rewiring, and everything in between.
Reach us any time at (945) 446-2995.
Call Carrollton Electrical Company and you will get a straight conversation about the work, a price before anything is booked, and a visit that covers what was discussed.
Also serving: Irving, Shady Shores, Ponder.
View our full coverage area.
Below is a plain-language look at the electrical work we handle most often in Arlington and the surrounding area. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. Read through, find what applies to your situation, and call us for a price and a timeline before anything is scheduled.
| Service Type | Scope of Work | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Electrical Panel & Service Upgrades |
| Homes with older 100-amp panels, repeated tripping, or plans to add an EV charger or major appliance | North Texas cooling loads run hard through long summers, and older panels sized for a different era often show the strain before anything else fails. |
| Whole-Home Surge Protection |
| Any household with sensitive electronics, a home EV charger, or exposure to North Texas storm activity | A power strip only protects what is plugged into it. A panel-level device absorbs a voltage spike before it reaches any circuit in the house. |
| Backup Generator Installation |
| Homeowners who have lost power during Arlington-area storms and want critical circuits protected | The transfer switch is the part that makes a generator hookup safe. It prevents backfeed onto utility lines and must be installed correctly. |
Call us at (945) 446-2995 any time to get a price, ask about a specific job, or schedule an electrical service call in Arlington or the surrounding area.
(945) 446-2995